The following materials may be accepted for recycling by meeting very strict acceptance criteria:

Above Ground and Underground Storage Tanks
  Must be drained with a 12" hole, have no liquids or sludge, and no combustible vapors.
Aerosol Cans
  Must be empty (no pressure and no liquids).
  Must have fluid filled capacitors removed. Must have certification that CFCs have been properly removed.
  Must have title.
Barrels, drums, pails and buckets
  Must be triple rinsed, dried and lid removed.
Bullet Lead, Lead Plate, Lead Acid Batteries
  Only accepted at the non-ferrous department scale.
Closed Top Drums
  Must have no free liquids and top removed or drum is crushed.
Compressed Gas Cylinders
  Must be devalved and cut in half.
Gas Tanks
  Must have visible 8" x 8" hole and be dry.
Pressure Containers (Aerosol Cans, Natural Gas Containers, LP Gas Containers
  Must be devalved and hole cut into the container.
  Larger than 100 gallon must have 12 inch hole.
  Must be drained and have a letter verifying no PCBs are present.
Turnings, Borings, Motor Blocks, and Oily Scrap
  Only accepted when unloaded directly into the designated area.

Jarvis Metals Recycling does not buy stolen materials. Valid State Issued Driver’s License or Identification Card is required for sale of regulated materials - please present at the time payment is received.

7825 Olive Avenue
Lubbock, Texas 79404

Facebook Logo

Like us on Facebook!    

 © 2016 Jarvis Metals Recycling, Inc. All Rights Reserved.